For your convenience, we have used lower resolution pictures for faster downloading times.

EZ BEND(R) Products

 

 

EZ BEND® PVC Benders are used to heat and soften PVC plastic pipe to be used as electrical conduit.  PVC electrical conduit is easy to install because all you have to do is cut, bend and glue.

EZ-2_.jpg                            EZ-4_.jpg

EZ-2 SERIES  ½" to 2"                      EZ-4 SERIES  ½" to 4"

 

EZ-6_.jpg                     EZ-8 PVC Bender look alike.jpg (12686 bytes)

  EZ-6 SERIES  ½" to 6"                          EZ-8 2" to 8" PVC BENDER            

 

PK26.jpg (8056 bytes)                                      EZ-125 Cutter.jpg (9672 bytes)

BENDING PLUG KITS                         EZ-125 RATCHET CUTTER

Questions?  

Contact us at: pvcbend@ezbend.com

 

[Next ]

Bradshaw Mfg., Inc.   9627 Clinton Road     Cleveland,  OH    44144  800-782-3009 / 216-281-8585  · FAX 888-782-3010 /  FAX 216-281-8586 

Copyright © 2003 Bradshaw Mfg., Inc. / EZ BEND® is a registered trademark of Bradshaw Mfg., Inc. All Rights Reserved.
Last modified: May 22, 2006              We accept VISA and MasterCard.     E-mail:  pvcbend@ezbend.com

Incoloy®  is a registered trademark of the National Nickel Co.