For your convenience, we have used lower resolution pictures for faster downloading times.

Bending Plug Kits

 

These Bending Plug Kits are used when bending PVC Plastic pipe over 2" in diameter. We STRONGLY RECOMMEND their use for easier bends.

"Click" a picture for our higher resolution photograph.

 PK-24 Bending Plug Kit     PK-46 Bending Plug Kit      PK-26 Complete Bending Plug Kit

          PK-24   2" TO 4"        PK-46    4" TO 6"         PK-26    2" TO 6" 

              FOR SMALL SIZE PIPE          FOR LARGE SIZE PIPE        COMPLETE BENDING PLUG KIT

All our Bending Plug Kits include:  · Adapters for half sizes and bellied ends.

                                                 · A rugged, plastic carrying case.

                                                 · An organized interior.

bulletBending Plugs are used to help form smooth, NEC code compliant bends in pipe over 2" in diameter.
bulletPlace the plugs in the pipe before heating, allowing the trapped heat to support the walls from crimping or collapsing during forming. Do not take the plugs out until after forming the bend. If the plugs come out before forming, you must reheat the pipe to pressurize the trapped air.
bulletVery tight radius bends are difficult to achieve. When bending pipe with a radius less than 3 dia (three times the diameter of the pipe), special tooling other than bending plugs may be required.

PRICING:

Description SKU # Price
PK-24  2" TO 4" BENDING PLUG KIT WITH CARRYING CASE PK-24 $268.00
PK-46  4" TO 6" BENDING PLUG KIT WITH CARRYING CASE PK-46 $360.00
PK-26  2" TO 6" COMPLETE BENDING PLUG KIT WITH CASE PK-26 $490.00
 

Questions?

Contact us at: pvcbend@ezbend.com

[Next ]

Bradshaw Mfg., Inc.   9627 Clinton Road     Cleveland,  OH    44144  800-782-3009 / 216-281-8585  · FAX 888-782-3010 /  FAX 216-281-8586 

Copyright © 2003 Bradshaw Mfg., Inc. / EZ BEND® is a registered trademark of Bradshaw Mfg., Inc. All Rights Reserved.
Last modified: May 22, 2006              We accept VISA and MasterCard.     E-mail:  pvcbend@ezbend.com

Incoloy®  is a registered trademark of the National Nickel Co.